BSP742RIXUMA1 vs BTS428L2ATMA1 Comparaison
Comparaison détaillée côte à côte de BSP742RIXUMA1 par Infineon et BTS428L2ATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BSP742RIXUMA1 | BTS428L2ATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,96 | $1,45 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologie | 1:1 N-Channel High-Side | — |
| Family | miniPROFET | — |
| Output Current (Nominal) | 400 mA | — |
| RDS(on) Typical at 25°C | 250 mΩ | — |
| Tension d'alimentation de fonctionnement | 5 V to 34 V | [DATA_NEEDED: nominal and range] |
| Load Dump Tolerance | 41 V | — |
| Reverse Battery Protection | -16 V | — |
| On-State Resistance (max) | [DATA_NEEDED: RDS(on) maximum at 25°C] | — |
| Limitation de courant | [DATA_NEEDED: current limit typical value] | — |
| Arrêt thermique | Yes with auto restart | — |
| Overvoltage Protection | Yes (including load dump) | Load-dump / overvoltage clamp |
| Short Circuit Protection | Yes | — |
| Open Load Detection | Yes (diagnostic pin) | — |
| Demagnetization of Inductive Loads | Yes (internal) | — |
| Boîtier | PG-DSO-8-6 (SOIC-8, 3.90 mm body) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 °C to +150 °C | [DATA_NEEDED: min/max] |
| Niveau MSL | [DATA_NEEDED: MSL rating] | — |
| Statut RoHS | Compliant | — |
| Technology | — | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Number of Channels | — | 1 |
| Input Type | — | CMOS-compatible, ground-referenced |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| Standby Current | — | Very low (per datasheet) |
| Overtemperature Protection | — | Yes, with autorestart |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |