BSP742RIXUMA1 vs BTS428L2ATMA1 Comparación
Comparación detallada lado a lado de BSP742RIXUMA1 por Infineon y BTS428L2ATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BSP742RIXUMA1 | BTS428L2ATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,96 | $1,45 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topología | 1:1 N-Channel High-Side | — |
| Family | miniPROFET | — |
| Output Current (Nominal) | 400 mA | — |
| RDS(on) Typical at 25°C | 250 mΩ | — |
| Tensión de alimentación de funcionamiento | 5 V to 34 V | [DATA_NEEDED: nominal and range] |
| Load Dump Tolerance | 41 V | — |
| Reverse Battery Protection | -16 V | — |
| On-State Resistance (max) | [DATA_NEEDED: RDS(on) maximum at 25°C] | — |
| Limitación de corriente | [DATA_NEEDED: current limit typical value] | — |
| Apagado térmico | Yes with auto restart | — |
| Overvoltage Protection | Yes (including load dump) | Load-dump / overvoltage clamp |
| Short Circuit Protection | Yes | — |
| Open Load Detection | Yes (diagnostic pin) | — |
| Demagnetization of Inductive Loads | Yes (internal) | — |
| Encapsulado | PG-DSO-8-6 (SOIC-8, 3.90 mm body) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Rango de temperatura de funcionamiento | -40 °C to +150 °C | [DATA_NEEDED: min/max] |
| Nivel MSL | [DATA_NEEDED: MSL rating] | — |
| Estado RoHS | Compliant | — |
| Technology | — | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Number of Channels | — | 1 |
| Input Type | — | CMOS-compatible, ground-referenced |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| Standby Current | — | Very low (per datasheet) |
| Overtemperature Protection | — | Yes, with autorestart |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |