BTH60702EPVXUMA1 vs BTS70402EPGXUMA1 Vergleich
Detaillierter Direktvergleich von BTH60702EPVXUMA1 von Infineon und BTS70402EPGXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTH60702EPVXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,21 | $3,18 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | PROFET + 48V | — |
| Funktion | Smart high-side power switch (dual channel, 2 x 1:1) | Smart High-Side Power Switch |
| On-State Resistance (typ.) | 60 mΩ per channel | — |
| Continuous Load Current (per channel) | 1.7 A | — |
| Number of Channels | 2 | 4 |
| Configuration | 2 x 1:1 (dual independent high-side) | — |
| Transistortyp | N-channel vertical power MOSFET with charge pump | — |
| Nominal Operating Voltage | 48 V board net | — |
| Maximum Supply Voltage | 54 V | — |
| Load Voltage Range | [DATA_NEEDED: load voltage range] | — |
| Current Sense / Diagnosis | Yes (analog current-sense output) | — |
| Protection Features | Over-load, short-circuit, over-voltage, reverse battery, thermal shutdown | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Gehäuse | PG-TSDSO-14 with exposed pad | PG-TSDSO-14 (exposed thermal pad) |
| Operating Temperature (junction) | -40 °C to +150 °C (automotive grade) | — |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL level] | — |
| RoHS-Status | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Ausgangskonfiguration | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Betriebstemperaturbereich | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |