BTH60702EPVXUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTH60702EPVXUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTH60702EPVXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,21 | $3,18 |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Product Family | PROFET + 48V | — |
| Fonction | Smart high-side power switch (dual channel, 2 x 1:1) | Smart High-Side Power Switch |
| On-State Resistance (typ.) | 60 mΩ per channel | — |
| Continuous Load Current (per channel) | 1.7 A | — |
| Number of Channels | 2 | 4 |
| Configuration | 2 x 1:1 (dual independent high-side) | — |
| Type de transistor | N-channel vertical power MOSFET with charge pump | — |
| Nominal Operating Voltage | 48 V board net | — |
| Maximum Supply Voltage | 54 V | — |
| Load Voltage Range | [DATA_NEEDED: load voltage range] | — |
| Current Sense / Diagnosis | Yes (analog current-sense output) | — |
| Protection Features | Over-load, short-circuit, over-voltage, reverse battery, thermal shutdown | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Boîtier | PG-TSDSO-14 with exposed pad | PG-TSDSO-14 (exposed thermal pad) |
| Operating Temperature (junction) | -40 °C to +150 °C (automotive grade) | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Statut RoHS | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Configuration de sortie | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Plage de température de fonctionnement | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |