BTH60702EPVXUMA1 vs BTS70402EPGXUMA1 比較

詳細な並列比較: BTH60702EPVXUMA1 メーカー: Infineon および BTS70402EPGXUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

Infineon
BTH60702EPVXUMA1 BTH60702EPVXUMA1 - 60 mΩ Dual High-Side Switch 1.7A | Infineon

BTH60702EPVXUMA1 - 60 mΩ Dual High-Side Switch 1.7A | Infineon

BTH60702EPVXUMA1 ✓ 生産中
Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ 生産中

仕様比較

パラメータ BTH60702EPVXUMA1 BTS70402EPGXUMA1
ブランド Infineon Infineon
カテゴリ Power MOSFET Drivers Power MOSFET Drivers
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $1.21 $3.18
Manufacturer Infineon Technologies Infineon Technologies
Product Family PROFET + 48V —
機能 Smart high-side power switch (dual channel, 2 x 1:1) Smart High-Side Power Switch
On-State Resistance (typ.) 60 mΩ per channel —
Continuous Load Current (per channel) 1.7 A —
Number of Channels 2 4
Configuration 2 x 1:1 (dual independent high-side) —
トランジスタタイプ N-channel vertical power MOSFET with charge pump —
Nominal Operating Voltage 48 V board net —
Maximum Supply Voltage 54 V —
Load Voltage Range [DATA_NEEDED: load voltage range] —
Current Sense / Diagnosis Yes (analog current-sense output) —
Protection Features Over-load, short-circuit, over-voltage, reverse battery, thermal shutdown Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
パッケージ PG-TSDSO-14 with exposed pad PG-TSDSO-14 (exposed thermal pad)
Operating Temperature (junction) -40 °C to +150 °C (automotive grade) —
実装タイプ Surface Mount Surface Mount
MSLレベル [DATA_NEEDED: MSL level] —
RoHS ステータス Compliant —
Part Family — PROFET+2 (BTS70xxx series)
出力構成 — High-side, N-channel MOSFET
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Diagnostic Interface — SPI status register, current-sense feedback
動作温度範囲 — -40 °C to +150 °C junction
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼