BTH61002EPAXUMA1 vs BTS51202EKAXUMA1 Vergleich
Detaillierter Direktvergleich von BTH61002EPAXUMA1 von Infineon und BTS51202EKAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTH61002EPAXUMA1 - 2x 200mOhm 60V 48V Auto High-Side Switch | Infineon
BTH61002EPAXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | BTH61002EPAXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,82 | $1,68 |
| Manufacturer | Infineon Technologies | — |
| Product Family | PROFET + 48V | — |
| Topologie | Dual high-side switch (2 x 1:1) | Dual High-Side Switch (2 channels) |
| Number of Channels | 2 | 2 |
| Switch Type | N-channel vertical power MOSFET with charge pump | — |
| Continuous Load Current per Channel | 2.0 A | — |
| Typical On-State Resistance (Ron) | 200 mOhm | — |
| Nominal Supply Voltage | 54 V | — |
| Maximum Operating Voltage | 60 V | — |
| Load Dump Capability | 60 V | — |
| Input Control Logic | Active-High / Active-Low | — |
| Diagnostic Function | Current sense output, open-load detection, short-to-ground/short-to-battery, overtemperature | — |
| Current Limitation | Adjustable | — |
| Gehäuse | PG-TSDSO-14 (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| Betriebstemperaturbereich | -40 C to +150 C [DATA_NEEDED: junction T_max] | — |
| RoHS-Status | Compliant | Compliant |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Betriebstemperatur | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |