BTH61002EPAXUMA1 vs BTS51202EKAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTH61002EPAXUMA1 par Infineon et BTS51202EKAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTH61002EPAXUMA1 - 2x 200mOhm 60V 48V Auto High-Side Switch | Infineon
BTH61002EPAXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTH61002EPAXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,82 | $1,68 |
| Manufacturer | Infineon Technologies | — |
| Product Family | PROFET + 48V | — |
| Topologie | Dual high-side switch (2 x 1:1) | Dual High-Side Switch (2 channels) |
| Number of Channels | 2 | 2 |
| Switch Type | N-channel vertical power MOSFET with charge pump | — |
| Continuous Load Current per Channel | 2.0 A | — |
| Typical On-State Resistance (Ron) | 200 mOhm | — |
| Nominal Supply Voltage | 54 V | — |
| Maximum Operating Voltage | 60 V | — |
| Load Dump Capability | 60 V | — |
| Input Control Logic | Active-High / Active-Low | — |
| Diagnostic Function | Current sense output, open-load detection, short-to-ground/short-to-battery, overtemperature | — |
| Current Limitation | Adjustable | — |
| Boîtier | PG-TSDSO-14 (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| Plage de température de fonctionnement | -40 C to +150 C [DATA_NEEDED: junction T_max] | — |
| Statut RoHS | Compliant | Compliant |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Température de fonctionnement | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |