BTH61002EPAXUMA1 vs BTS51202EKAXUMA1 Comparación
Comparación detallada lado a lado de BTH61002EPAXUMA1 por Infineon y BTS51202EKAXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Infineon
BTH61002EPAXUMA1 - 2x 200mOhm 60V 48V Auto High-Side Switch | Infineon
BTH61002EPAXUMA1 ✓ ActivoComparación de especificaciones
| Parámetro | BTH61002EPAXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,82 | $1,68 |
| Manufacturer | Infineon Technologies | — |
| Product Family | PROFET + 48V | — |
| Topología | Dual high-side switch (2 x 1:1) | Dual High-Side Switch (2 channels) |
| Number of Channels | 2 | 2 |
| Switch Type | N-channel vertical power MOSFET with charge pump | — |
| Continuous Load Current per Channel | 2.0 A | — |
| Typical On-State Resistance (Ron) | 200 mOhm | — |
| Nominal Supply Voltage | 54 V | — |
| Maximum Operating Voltage | 60 V | — |
| Load Dump Capability | 60 V | — |
| Input Control Logic | Active-High / Active-Low | — |
| Diagnostic Function | Current sense output, open-load detection, short-to-ground/short-to-battery, overtemperature | — |
| Current Limitation | Adjustable | — |
| Encapsulado | PG-TSDSO-14 (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| Rango de temperatura de funcionamiento | -40 C to +150 C [DATA_NEEDED: junction T_max] | — |
| Estado RoHS | Compliant | Compliant |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Temperatura de funcionamiento | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |