BTS3011TEATMA1 vs IFX007TAUMA1 Vergleich
Detaillierter Direktvergleich von BTS3011TEATMA1 von Infineon und IFX007TAUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS3011TEATMA1 | IFX007TAUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,51 | $2,62 |
| Product Type | Smart Low-Side Power Switch | Half-Bridge Motor Driver (H-Bridge half) |
| Number of Channels | 1 | — |
| On-Resistance R_DS(on) (typ.) | 11 mΩ | — |
| Continuous Load Current | 10 A | 40 A (typical application) |
| Operating Voltage Range | 3 V to 28 V | — |
| Switch Technology | N-channel vertical power MOSFET | — |
| Input Type | Logic-level CMOS compatible | — |
| Gehäuse | PG-TO252-5 (DPAK-5) | PG-TO263-7-1 (D2PAK-7) with exposed thermal tab |
| Anzahl der Pins | 5 (4 + Tab) | — |
| Betriebs-Sperrschichttemperatur | -40 °C to +150 °C | — |
| ESD Protection (HBM) | ±8 kV (output pin) | — |
| AEC-Q100 Qualification | Grade 1 qualified | — |
| Integrated Protections | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection | — |
| Diagnostic Output | Open-drain status feedback pin | — |
| Montageart | Surface Mount | Surface Mount |
| RoHS-Status | Compliant | Compliant |
| Topologie | — | High-side P-MOSFET + Low-side N-MOSFET with integrated driver |
| Supply Voltage Range | — | 5.5 V to 40 V |
| MOSFET RDS(on) (typical) | — | 12.8 mΩ (per switch) |
| Logic Input HIGH (IN high) | — | 1.6 V to 2.0 V |
| Logic Input LOW (IN low) | — | 1.1 V to 1.3 V |
| PWM Frequency (max) | — | 25 kHz |
| Betriebstemperaturbereich | — | -40 °C to +150 °C (junction) |
| Protection Features | — | Over-temperature, over-current latch, under-voltage lockout, short-circuit |
| Status Output | — | Yes (open-drain fault flag) |
| Current Sensing | — | Integrated via low-side RDS(on) sensing (no shunt required) |
| Pin-Anzahl | — | 7 + Tab |
| MSL-Level | — | 3 (per JEDEC J-STD-020) |
| Automotive Qualification | — | AEC-Q100 qualified (per product family) |