BTS3011TEATMA1 vs IFX007TAUMA1 Comparación
Comparación detallada lado a lado de BTS3011TEATMA1 por Infineon y IFX007TAUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS3011TEATMA1 | IFX007TAUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Motor Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,51 | $2,62 |
| Product Type | Smart Low-Side Power Switch | Half-Bridge Motor Driver (H-Bridge half) |
| Number of Channels | 1 | — |
| On-Resistance R_DS(on) (typ.) | 11 mΩ | — |
| Continuous Load Current | 10 A | 40 A (typical application) |
| Operating Voltage Range | 3 V to 28 V | — |
| Switch Technology | N-channel vertical power MOSFET | — |
| Input Type | Logic-level CMOS compatible | — |
| Encapsulado | PG-TO252-5 (DPAK-5) | PG-TO263-7-1 (D2PAK-7) with exposed thermal tab |
| Número de pines | 5 (4 + Tab) | — |
| Temperatura de unión de funcionamiento | -40 °C to +150 °C | — |
| ESD Protection (HBM) | ±8 kV (output pin) | — |
| AEC-Q100 Qualification | Grade 1 qualified | — |
| Integrated Protections | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection | — |
| Diagnostic Output | Open-drain status feedback pin | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Estado RoHS | Compliant | Compliant |
| Topología | — | High-side P-MOSFET + Low-side N-MOSFET with integrated driver |
| Supply Voltage Range | — | 5.5 V to 40 V |
| MOSFET RDS(on) (typical) | — | 12.8 mΩ (per switch) |
| Logic Input HIGH (IN high) | — | 1.6 V to 2.0 V |
| Logic Input LOW (IN low) | — | 1.1 V to 1.3 V |
| PWM Frequency (max) | — | 25 kHz |
| Rango de temperatura de funcionamiento | — | -40 °C to +150 °C (junction) |
| Protection Features | — | Over-temperature, over-current latch, under-voltage lockout, short-circuit |
| Status Output | — | Yes (open-drain fault flag) |
| Current Sensing | — | Integrated via low-side RDS(on) sensing (no shunt required) |
| Recuento de pines | — | 7 + Tab |
| Nivel MSL | — | 3 (per JEDEC J-STD-020) |
| Automotive Qualification | — | AEC-Q100 qualified (per product family) |