BTS3011TEATMA1 vs IFX007TAUMA1 Comparaison
Comparaison détaillée côte à côte de BTS3011TEATMA1 par Infineon et IFX007TAUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS3011TEATMA1 | IFX007TAUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,51 | $2,62 |
| Product Type | Smart Low-Side Power Switch | Half-Bridge Motor Driver (H-Bridge half) |
| Number of Channels | 1 | — |
| On-Resistance R_DS(on) (typ.) | 11 mΩ | — |
| Continuous Load Current | 10 A | 40 A (typical application) |
| Operating Voltage Range | 3 V to 28 V | — |
| Switch Technology | N-channel vertical power MOSFET | — |
| Input Type | Logic-level CMOS compatible | — |
| Boîtier | PG-TO252-5 (DPAK-5) | PG-TO263-7-1 (D2PAK-7) with exposed thermal tab |
| Nombre de broches | 5 (4 + Tab) | — |
| Température de jonction en fonctionnement | -40 °C to +150 °C | — |
| ESD Protection (HBM) | ±8 kV (output pin) | — |
| AEC-Q100 Qualification | Grade 1 qualified | — |
| Integrated Protections | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection | — |
| Diagnostic Output | Open-drain status feedback pin | — |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| Topologie | — | High-side P-MOSFET + Low-side N-MOSFET with integrated driver |
| Supply Voltage Range | — | 5.5 V to 40 V |
| MOSFET RDS(on) (typical) | — | 12.8 mΩ (per switch) |
| Logic Input HIGH (IN high) | — | 1.6 V to 2.0 V |
| Logic Input LOW (IN low) | — | 1.1 V to 1.3 V |
| PWM Frequency (max) | — | 25 kHz |
| Plage de température de fonctionnement | — | -40 °C to +150 °C (junction) |
| Protection Features | — | Over-temperature, over-current latch, under-voltage lockout, short-circuit |
| Status Output | — | Yes (open-drain fault flag) |
| Current Sensing | — | Integrated via low-side RDS(on) sensing (no shunt required) |
| Nombre de broches | — | 7 + Tab |
| Niveau MSL | — | 3 (per JEDEC J-STD-020) |
| Automotive Qualification | — | AEC-Q100 qualified (per product family) |