BTS428L2 vs BTS428L2ATMA1 Vergleich
Detaillierter Direktvergleich von BTS428L2 von Infineon und BTS428L2ATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS428L2 | BTS428L2ATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,82 | $1,45 |
| Product Type | Smart High-Side Power Switch (Classic PROFET) | Smart High-Side Power Switch |
| Topologie | Single-channel high-side N-channel MOSFET with charge pump | — |
| Nominal Operating Voltage | 24 V (automotive 12 V/24 V board net) | — |
| Maximum Continuous Load Current | 5.8 A | — |
| On-State Resistance (RDS(on)) | 60 mΩ (typical) | — |
| Number of Channels | 1 | 1 |
| Status Feedback | Yes (dedicated status pin) | — |
| Überstromschutz | Yes (integrated) | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overtemperature Protection | Yes (integrated thermal shutdown) | Yes, with autorestart |
| Overvoltage Protection | Yes (load-dump tolerant) | Load-dump / overvoltage clamp |
| Reverse Battery Protection | Yes (integrated) | — |
| Standby Current | Low standby current (green/RoHS-compliant device) | Very low (per datasheet) |
| Betriebstemperaturbereich | -40 °C to +150 °C | [DATA_NEEDED: min/max] |
| Gehäuse | PG-TO252-5-11 (TO-252 / DPAK, 5 leads) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Montageart | Surface Mount | Surface Mount |
| RoHS Compliance | Compliant (Pb-free, green product, IPC/JEDEC J-STD-020) | — |
| Technology | — | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Input Type | — | CMOS-compatible, ground-referenced |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| Betriebsversorgungsspannung | — | [DATA_NEEDED: nominal and range] |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |