BTS428L2 vs BTS428L2ATMA1 Comparaison
Comparaison détaillée côte à côte de BTS428L2 par Infineon et BTS428L2ATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS428L2 | BTS428L2ATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,82 | $1,45 |
| Product Type | Smart High-Side Power Switch (Classic PROFET) | Smart High-Side Power Switch |
| Topologie | Single-channel high-side N-channel MOSFET with charge pump | — |
| Nominal Operating Voltage | 24 V (automotive 12 V/24 V board net) | — |
| Maximum Continuous Load Current | 5.8 A | — |
| On-State Resistance (RDS(on)) | 60 mΩ (typical) | — |
| Number of Channels | 1 | 1 |
| Status Feedback | Yes (dedicated status pin) | — |
| Protection contre les surintensités | Yes (integrated) | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overtemperature Protection | Yes (integrated thermal shutdown) | Yes, with autorestart |
| Overvoltage Protection | Yes (load-dump tolerant) | Load-dump / overvoltage clamp |
| Reverse Battery Protection | Yes (integrated) | — |
| Standby Current | Low standby current (green/RoHS-compliant device) | Very low (per datasheet) |
| Plage de température de fonctionnement | -40 °C to +150 °C | [DATA_NEEDED: min/max] |
| Boîtier | PG-TO252-5-11 (TO-252 / DPAK, 5 leads) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Type de montage | Surface Mount | Surface Mount |
| RoHS Compliance | Compliant (Pb-free, green product, IPC/JEDEC J-STD-020) | — |
| Technology | — | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Input Type | — | CMOS-compatible, ground-referenced |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| Tension d'alimentation de fonctionnement | — | [DATA_NEEDED: nominal and range] |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |