BTS428L2 vs BTS428L2ATMA1 Comparación
Comparación detallada lado a lado de BTS428L2 por Infineon y BTS428L2ATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS428L2 | BTS428L2ATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $0,82 | $1,45 |
| Product Type | Smart High-Side Power Switch (Classic PROFET) | Smart High-Side Power Switch |
| Topología | Single-channel high-side N-channel MOSFET with charge pump | — |
| Nominal Operating Voltage | 24 V (automotive 12 V/24 V board net) | — |
| Maximum Continuous Load Current | 5.8 A | — |
| On-State Resistance (RDS(on)) | 60 mΩ (typical) | — |
| Number of Channels | 1 | 1 |
| Status Feedback | Yes (dedicated status pin) | — |
| Protección contra sobrecorriente | Yes (integrated) | — |
| Short-Circuit Protection | Yes (integrated) | — |
| Overtemperature Protection | Yes (integrated thermal shutdown) | Yes, with autorestart |
| Overvoltage Protection | Yes (load-dump tolerant) | Load-dump / overvoltage clamp |
| Reverse Battery Protection | Yes (integrated) | — |
| Standby Current | Low standby current (green/RoHS-compliant device) | Very low (per datasheet) |
| Rango de temperatura de funcionamiento | -40 °C to +150 °C | [DATA_NEEDED: min/max] |
| Encapsulado | PG-TO252-5-11 (TO-252 / DPAK, 5 leads) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Tipo de montaje | Surface Mount | Surface Mount |
| RoHS Compliance | Compliant (Pb-free, green product, IPC/JEDEC J-STD-020) | — |
| Technology | — | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Input Type | — | CMOS-compatible, ground-referenced |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| Tensión de alimentación de funcionamiento | — | [DATA_NEEDED: nominal and range] |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |