BTS5014SDAAUMA1 vs BTS6133DAUMA1 Vergleich
Detaillierter Direktvergleich von BTS5014SDAAUMA1 von Infineon und BTS6133DAUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS5014SDAAUMA1 | BTS6133DAUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,55 | $1,98 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 1 | — |
| Topologie | N-Channel vertical power MOSFET with charge pump | — |
| Nominal Load Current | 6 A | — |
| Betriebsversorgungsspannung | 5 V to 28 V (load-dump tolerant to 41 V) | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | [DATA_NEEDED: RDS(on) at 25C] |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| Strombegrenzung | [DATA_NEEDED: ICL typical] | — |
| Betriebstemperaturbereich | -40 C to +150 C (junction) | -40C to +150C |
| Gehäuse | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-5-11 (DPAK-5) |
| Montageart | Surface Mount | Surface Mount |
| Load Type | Resistive, inductive, capacitive | — |
| Diagnostic Features | Current sense (IS), fault status (ST), open-drain | — |
| Protection Functions | Over-current, over-temperature, over-voltage, ESD | — |
| ESD Protection | [DATA_NEEDED: HBM/CDM rating] | — |
| RoHS-Status | Compliant | Compliant |
| Process Technology | Infineon SMART7 | — |
| Manufacturer | — | Infineon Technologies |
| Part Number | — | BTS6133DAUMA1 |
| Technology | — | SIPMOS (N-channel MOSFET with control IC) |
| Switch Configuration | — | 1:1 (single high-side) |
| Anzahl der Ausgänge | — | 1 |
| Peak Drain Current | — | 41 A |
| Continuous Load Current | — | 8 A |
| Operating Voltage Range | — | [DATA_NEEDED: VBB operating range] |
| Pin-Anzahl | — | 5 |
| Protection Features | — | Over-temperature, short-circuit, overload, under-voltage, over-voltage, current limitation |
| Diagnostic Feedback | — | Yes (status / fault pin) |
| MSL-Level | — | 3 (per JEDEC J-STD-020, typical for DPAK) |
| AEC-Q100 Qualified | — | AEC-Q100 qualified (automotive grade) |
| Datasheet Document Size | — | 257 Kbytes (15 pages) |