BTS5014SDAAUMA1 vs BTS6133DAUMA1 Comparación
Comparación detallada lado a lado de BTS5014SDAAUMA1 por Infineon y BTS6133DAUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | BTS5014SDAAUMA1 | BTS6133DAUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,55 | $1,98 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 1 | — |
| Topología | N-Channel vertical power MOSFET with charge pump | — |
| Nominal Load Current | 6 A | — |
| Tensión de alimentación de funcionamiento | 5 V to 28 V (load-dump tolerant to 41 V) | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | [DATA_NEEDED: RDS(on) at 25C] |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| Limitación de corriente | [DATA_NEEDED: ICL typical] | — |
| Rango de temperatura de funcionamiento | -40 C to +150 C (junction) | -40C to +150C |
| Encapsulado | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-5-11 (DPAK-5) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Load Type | Resistive, inductive, capacitive | — |
| Diagnostic Features | Current sense (IS), fault status (ST), open-drain | — |
| Protection Functions | Over-current, over-temperature, over-voltage, ESD | — |
| ESD Protection | [DATA_NEEDED: HBM/CDM rating] | — |
| Estado RoHS | Compliant | Compliant |
| Process Technology | Infineon SMART7 | — |
| Manufacturer | — | Infineon Technologies |
| Part Number | — | BTS6133DAUMA1 |
| Technology | — | SIPMOS (N-channel MOSFET with control IC) |
| Switch Configuration | — | 1:1 (single high-side) |
| Número de salidas | — | 1 |
| Peak Drain Current | — | 41 A |
| Continuous Load Current | — | 8 A |
| Operating Voltage Range | — | [DATA_NEEDED: VBB operating range] |
| Recuento de pines | — | 5 |
| Protection Features | — | Over-temperature, short-circuit, overload, under-voltage, over-voltage, current limitation |
| Diagnostic Feedback | — | Yes (status / fault pin) |
| Nivel MSL | — | 3 (per JEDEC J-STD-020, typical for DPAK) |
| AEC-Q100 Qualified | — | AEC-Q100 qualified (automotive grade) |
| Datasheet Document Size | — | 257 Kbytes (15 pages) |