BTS5014SDAAUMA1 vs BTS6133DAUMA1 Comparaison
Comparaison détaillée côte à côte de BTS5014SDAAUMA1 par Infineon et BTS6133DAUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS5014SDAAUMA1 | BTS6133DAUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,55 | $1,98 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Number of Channels | 1 | — |
| Topologie | N-Channel vertical power MOSFET with charge pump | — |
| Nominal Load Current | 6 A | — |
| Tension d'alimentation de fonctionnement | 5 V to 28 V (load-dump tolerant to 41 V) | — |
| On-State Resistance (RDS(on)) | [DATA_NEEDED: RDS(on) at 25C] | [DATA_NEEDED: RDS(on) at 25C] |
| Standby Current | [DATA_NEEDED: standby current uA] | — |
| Limitation de courant | [DATA_NEEDED: ICL typical] | — |
| Plage de température de fonctionnement | -40 C to +150 C (junction) | -40C to +150C |
| Boîtier | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-5-11 (DPAK-5) |
| Type de montage | Surface Mount | Surface Mount |
| Load Type | Resistive, inductive, capacitive | — |
| Diagnostic Features | Current sense (IS), fault status (ST), open-drain | — |
| Protection Functions | Over-current, over-temperature, over-voltage, ESD | — |
| ESD Protection | [DATA_NEEDED: HBM/CDM rating] | — |
| Statut RoHS | Compliant | Compliant |
| Process Technology | Infineon SMART7 | — |
| Manufacturer | — | Infineon Technologies |
| Part Number | — | BTS6133DAUMA1 |
| Technology | — | SIPMOS (N-channel MOSFET with control IC) |
| Switch Configuration | — | 1:1 (single high-side) |
| Nombre de sorties | — | 1 |
| Peak Drain Current | — | 41 A |
| Continuous Load Current | — | 8 A |
| Operating Voltage Range | — | [DATA_NEEDED: VBB operating range] |
| Nombre de broches | — | 5 |
| Protection Features | — | Over-temperature, short-circuit, overload, under-voltage, over-voltage, current limitation |
| Diagnostic Feedback | — | Yes (status / fault pin) |
| Niveau MSL | — | 3 (per JEDEC J-STD-020, typical for DPAK) |
| AEC-Q100 Qualified | — | AEC-Q100 qualified (automotive grade) |
| Datasheet Document Size | — | 257 Kbytes (15 pages) |