BTS52004EKAXUMA1 vs BTS3035TFATMA1 Vergleich
Detaillierter Direktvergleich von BTS52004EKAXUMA1 von Infineon und BTS3035TFATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS52004EKAXUMA1 | BTS3035TFATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,65 | $0,61 |
| Product Type | Quad Smart High-Side Power Switch | Low-Side Power Switch |
| Topologie | High-Side, 1:1 N-Channel MOSFET with charge pump | — |
| Number of Channels | 4 | 1 |
| On-Resistance (Ron, typ) | 200 mΩ per channel | — |
| Continuous Load Current per Channel | 800 mA | — |
| Operating Voltage Range (Vbb) | 5 V to 38 V | — |
| Load Dump Tolerance | Up to 38 V | — |
| Standby Current | [DATA_NEEDED: typical Ibb(off)] | — |
| Quiescent Current (active) | [DATA_NEEDED: Ibb(on) typ] | — |
| PWM Frequency (max) | 1 kHz | — |
| Protection Features | Short-circuit, overload, overtemperature, overvoltage, open-load detection | — |
| Diagnostic Output | IS pin (proportional load current sense) | — |
| Betriebstemperaturbereich | -40 °C to +150 °C junction | -40C to +150C (junction) |
| Gehäuse | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) | PG-TO252-3-313 (DPAK) |
| Montageart | Surface Mount | Surface Mount |
| Technology | Infineon Smart6 | N-Channel MOSFET |
| MSL-Level | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL moisture sensitivity level] |
| RoHS-Status | Compliant | Compliant |
| Input Type | — | CMOS Logic Level |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Automotive Grade | — | AEC-Q100 qualified |