BTS52004EKAXUMA1 vs BTS3035TFATMA1 Comparaison
Comparaison détaillée côte à côte de BTS52004EKAXUMA1 par Infineon et BTS3035TFATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS52004EKAXUMA1 | BTS3035TFATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,65 | $0,61 |
| Product Type | Quad Smart High-Side Power Switch | Low-Side Power Switch |
| Topologie | High-Side, 1:1 N-Channel MOSFET with charge pump | — |
| Number of Channels | 4 | 1 |
| On-Resistance (Ron, typ) | 200 mΩ per channel | — |
| Continuous Load Current per Channel | 800 mA | — |
| Operating Voltage Range (Vbb) | 5 V to 38 V | — |
| Load Dump Tolerance | Up to 38 V | — |
| Standby Current | [DATA_NEEDED: typical Ibb(off)] | — |
| Quiescent Current (active) | [DATA_NEEDED: Ibb(on) typ] | — |
| PWM Frequency (max) | 1 kHz | — |
| Protection Features | Short-circuit, overload, overtemperature, overvoltage, open-load detection | — |
| Diagnostic Output | IS pin (proportional load current sense) | — |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | -40C to +150C (junction) |
| Boîtier | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) | PG-TO252-3-313 (DPAK) |
| Type de montage | Surface Mount | Surface Mount |
| Technology | Infineon Smart6 | N-Channel MOSFET |
| Niveau MSL | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL moisture sensitivity level] |
| Statut RoHS | Compliant | Compliant |
| Input Type | — | CMOS Logic Level |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Automotive Grade | — | AEC-Q100 qualified |