BTS52004EKAXUMA1 vs BTS3035TFATMA1 Comparação
Comparação detalhada lado a lado de BTS52004EKAXUMA1 por Infineon e BTS3035TFATMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | BTS52004EKAXUMA1 | BTS3035TFATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $1,65 | $0,61 |
| Product Type | Quad Smart High-Side Power Switch | Low-Side Power Switch |
| Topologia | High-Side, 1:1 N-Channel MOSFET with charge pump | — |
| Number of Channels | 4 | 1 |
| On-Resistance (Ron, typ) | 200 mΩ per channel | — |
| Continuous Load Current per Channel | 800 mA | — |
| Operating Voltage Range (Vbb) | 5 V to 38 V | — |
| Load Dump Tolerance | Up to 38 V | — |
| Standby Current | [DATA_NEEDED: typical Ibb(off)] | — |
| Quiescent Current (active) | [DATA_NEEDED: Ibb(on) typ] | — |
| PWM Frequency (max) | 1 kHz | — |
| Protection Features | Short-circuit, overload, overtemperature, overvoltage, open-load detection | — |
| Diagnostic Output | IS pin (proportional load current sense) | — |
| Faixa de temperatura de operação | -40 °C to +150 °C junction | -40C to +150C (junction) |
| Encapsulamento | PG-DSO-14-48-EP (DSO-14 with Exposed Pad) | PG-TO252-3-313 (DPAK) |
| Tipo de montagem | Surface Mount | Surface Mount |
| Technology | Infineon Smart6 | N-Channel MOSFET |
| Nível MSL | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: MSL moisture sensitivity level] |
| Status RoHS | Compliant | Compliant |
| Input Type | — | CMOS Logic Level |
| Continuous Drain Current | — | 5 A |
| On-Resistance (RDS(on)) | — | 30 mOhm (typical) |
| Drain-Source Voltage (VDS) Max | — | 40 V |
| Operating Voltage Range | — | 12 V nominal (load-dump tolerant to 40 V) |
| Fault Protection | — | Over-current, Short-circuit, Over-temperature, ESD |
| Status Feedback | — | Yes (open-drain diagnostic output) |
| Reverse Battery Protection | — | Integrated |
| Automotive Grade | — | AEC-Q100 qualified |