BTS70402EPGXUMA1 vs 6EDL7141XUMA1 Vergleich
Detaillierter Direktvergleich von BTS70402EPGXUMA1 von Infineon und 6EDL7141XUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS70402EPGXUMA1 | 6EDL7141XUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,18 | $2,05 |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Funktion | Smart High-Side Power Switch | — |
| Number of Channels | 4 | — |
| Ausgangskonfiguration | High-side, N-channel MOSFET | — |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | — |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Betriebstemperaturbereich | -40 °C to +150 °C junction | [DATA_NEEDED: operating temperature range] |
| Gehäuse | PG-TSDSO-14 (exposed thermal pad) | PG-VQFN-48-78 (7x7 mm power QFN with exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Type | — | Three-phase gate driver IC (smart gate driver) |
| Topologie | — | Three half-bridge drivers (high-side + low-side) |
| Betriebsversorgungsspannung | — | 5.5 V to 60 V (recommended) |
| Peak Gate Drive Current | — | 1.5 A source / 1.5 A sink |
| Number of Half-Bridges | — | 3 |
| Drive Type | — | Non-Inverting |
| Programmable Drive Voltage | — | Yes (configurable via SPI) |
| Integrated Current Sense Amplifiers | — | 3 (bi-directional low-side, programmable gain) |
| R_DSON Sensing | — | Supported via internal phase-node connections |
| Current Sense Output Compatibility | — | 3.3 V and 5 V logic |
| Communication Interface | — | SPI (digital configuration, >50 parameters) |
| Integrated Bootstrap Diodes | — | Yes |
| Integrated Charge Pump | — | Yes |
| MSL-Level | — | [DATA_NEEDED: MSL rating] |
| RoHS-Status | — | Compliant (per Infineon product page) |