BTS70402EPGXUMA1 vs 6EDL7141XUMA1 Comparação
Comparação detalhada lado a lado de BTS70402EPGXUMA1 por Infineon e 6EDL7141XUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | BTS70402EPGXUMA1 | 6EDL7141XUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Power MOSFET Drivers | Motor Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $3,18 | $2,05 |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Função | Smart High-Side Power Switch | — |
| Number of Channels | 4 | — |
| Configuração de saída | High-side, N-channel MOSFET | — |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | — |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Faixa de temperatura de operação | -40 °C to +150 °C junction | [DATA_NEEDED: operating temperature range] |
| Encapsulamento | PG-TSDSO-14 (exposed thermal pad) | PG-VQFN-48-78 (7x7 mm power QFN with exposed pad) |
| Tipo de montagem | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Type | — | Three-phase gate driver IC (smart gate driver) |
| Topologia | — | Three half-bridge drivers (high-side + low-side) |
| Tensão de alimentação de operação | — | 5.5 V to 60 V (recommended) |
| Peak Gate Drive Current | — | 1.5 A source / 1.5 A sink |
| Number of Half-Bridges | — | 3 |
| Drive Type | — | Non-Inverting |
| Programmable Drive Voltage | — | Yes (configurable via SPI) |
| Integrated Current Sense Amplifiers | — | 3 (bi-directional low-side, programmable gain) |
| R_DSON Sensing | — | Supported via internal phase-node connections |
| Current Sense Output Compatibility | — | 3.3 V and 5 V logic |
| Communication Interface | — | SPI (digital configuration, >50 parameters) |
| Integrated Bootstrap Diodes | — | Yes |
| Integrated Charge Pump | — | Yes |
| Nível MSL | — | [DATA_NEEDED: MSL rating] |
| Status RoHS | — | Compliant (per Infineon product page) |