BTS70402EPGXUMA1 vs 6EDL7141XUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70402EPGXUMA1 par Infineon et 6EDL7141XUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70402EPGXUMA1 | 6EDL7141XUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,18 | $2,05 |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Fonction | Smart High-Side Power Switch | — |
| Number of Channels | 4 | — |
| Configuration de sortie | High-side, N-channel MOSFET | — |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | — |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | [DATA_NEEDED: operating temperature range] |
| Boîtier | PG-TSDSO-14 (exposed thermal pad) | PG-VQFN-48-78 (7x7 mm power QFN with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Type | — | Three-phase gate driver IC (smart gate driver) |
| Topologie | — | Three half-bridge drivers (high-side + low-side) |
| Tension d'alimentation de fonctionnement | — | 5.5 V to 60 V (recommended) |
| Peak Gate Drive Current | — | 1.5 A source / 1.5 A sink |
| Number of Half-Bridges | — | 3 |
| Drive Type | — | Non-Inverting |
| Programmable Drive Voltage | — | Yes (configurable via SPI) |
| Integrated Current Sense Amplifiers | — | 3 (bi-directional low-side, programmable gain) |
| R_DSON Sensing | — | Supported via internal phase-node connections |
| Current Sense Output Compatibility | — | 3.3 V and 5 V logic |
| Communication Interface | — | SPI (digital configuration, >50 parameters) |
| Integrated Bootstrap Diodes | — | Yes |
| Integrated Charge Pump | — | Yes |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |
| Statut RoHS | — | Compliant (per Infineon product page) |