BTS710336ESAXUMA1 vs BTS426L1E3062AAUMA1 Vergleich
Detaillierter Direktvergleich von BTS710336ESAXUMA1 von Infineon und BTS426L1E3062AAUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS710336ESAXUMA1 | BTS426L1E3062AAUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,45 | $2,35 |
| Product Type | SPI high-side power switch (SPOC+2 family) | — |
| Number of Channels | 6 (4 x 1.5 A + 2 x 3 A) | — |
| On-State Resistance (1.5 A channels) | 70 mOhm (typical) | — |
| On-State Resistance (3 A channels) | 22.5 mOhm (typical) | — |
| Maximum Channel Current (1.5 A channels) | 1.5 A | — |
| Maximum Channel Current (3 A channels) | 3 A | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | — |
| Logic Interface | SPI (daisy-chain capable, 3.3 V and 5 V compatible) | — |
| Diagnosis | Open-load, short-to-battery, short-to-ground, overtemperature, overload | — |
| Protection Functions | Overload, short-circuit, overtemperature, overvoltage | — |
| Gehäuse | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) | PG-TO263-5-2 (DPAK-5, surface mount) |
| Technology | SMART7 (SMART power) | Smart SIPMOS, monolithic |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40C to +150C (Tj) | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] |
| RoHS-Status | Compliant | Compliant |
| Family | SPOC+2 | — |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | Classic PROFET 12V |
| Funktion | — | Smart High-Side Power Switch |
| Topologie | — | N-Channel Vertical Power FET with Charge Pump |
| Anzahl der Ausgänge | — | 1 |
| Ausgangskonfiguration | — | High-Side |
| Typical On-State Resistance (RDS(on)) | — | 5 mΩ |
| Continuous Load Current | — | 7 A |
| Nominal Operating Voltage | — | 12 V (automotive) |
| Input Type | — | CMOS-compatible, ground-referenced |
| Diagnostic Output | — | Yes (ST pin, ground-referenced feedback) |
| Embedded Protections | — | Overload, Thermal Shutdown, Overvoltage Clamp, ESD |
| Automotive Qualification | — | AEC-Q100 (per Classic PROFET 12V family) |