BTS710336ESAXUMA1 vs BTS426L1E3062AAUMA1 比較
詳細な並列比較: BTS710336ESAXUMA1 メーカー: Infineon および BTS426L1E3062AAUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
仕様比較
| パラメータ | BTS710336ESAXUMA1 | BTS426L1E3062AAUMA1 |
|---|---|---|
| ブランド | Infineon | Infineon |
| カテゴリ | Power MOSFET Drivers | Power MOSFET Drivers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $2.45 | $2.35 |
| Product Type | SPI high-side power switch (SPOC+2 family) | — |
| Number of Channels | 6 (4 x 1.5 A + 2 x 3 A) | — |
| On-State Resistance (1.5 A channels) | 70 mOhm (typical) | — |
| On-State Resistance (3 A channels) | 22.5 mOhm (typical) | — |
| Maximum Channel Current (1.5 A channels) | 1.5 A | — |
| Maximum Channel Current (3 A channels) | 3 A | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | — |
| Logic Interface | SPI (daisy-chain capable, 3.3 V and 5 V compatible) | — |
| Diagnosis | Open-load, short-to-battery, short-to-ground, overtemperature, overload | — |
| Protection Functions | Overload, short-circuit, overtemperature, overvoltage | — |
| パッケージ | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) | PG-TO263-5-2 (DPAK-5, surface mount) |
| Technology | SMART7 (SMART power) | Smart SIPMOS, monolithic |
| 実装タイプ | Surface Mount | Surface Mount |
| 動作温度範囲 | -40C to +150C (Tj) | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] |
| RoHS ステータス | Compliant | Compliant |
| Family | SPOC+2 | — |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | Classic PROFET 12V |
| 機能 | — | Smart High-Side Power Switch |
| トポロジー | — | N-Channel Vertical Power FET with Charge Pump |
| 出力数 | — | 1 |
| 出力構成 | — | High-Side |
| Typical On-State Resistance (RDS(on)) | — | 5 mΩ |
| Continuous Load Current | — | 7 A |
| Nominal Operating Voltage | — | 12 V (automotive) |
| Input Type | — | CMOS-compatible, ground-referenced |
| Diagnostic Output | — | Yes (ST pin, ground-referenced feedback) |
| Embedded Protections | — | Overload, Thermal Shutdown, Overvoltage Clamp, ESD |
| Automotive Qualification | — | AEC-Q100 (per Classic PROFET 12V family) |