BTS710336ESAXUMA1 vs BTS426L1E3062AAUMA1 Comparaison
Comparaison détaillée côte à côte de BTS710336ESAXUMA1 par Infineon et BTS426L1E3062AAUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS710336ESAXUMA1 | BTS426L1E3062AAUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,45 | $2,35 |
| Product Type | SPI high-side power switch (SPOC+2 family) | — |
| Number of Channels | 6 (4 x 1.5 A + 2 x 3 A) | — |
| On-State Resistance (1.5 A channels) | 70 mOhm (typical) | — |
| On-State Resistance (3 A channels) | 22.5 mOhm (typical) | — |
| Maximum Channel Current (1.5 A channels) | 1.5 A | — |
| Maximum Channel Current (3 A channels) | 3 A | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | — |
| Logic Interface | SPI (daisy-chain capable, 3.3 V and 5 V compatible) | — |
| Diagnosis | Open-load, short-to-battery, short-to-ground, overtemperature, overload | — |
| Protection Functions | Overload, short-circuit, overtemperature, overvoltage | — |
| Boîtier | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) | PG-TO263-5-2 (DPAK-5, surface mount) |
| Technology | SMART7 (SMART power) | Smart SIPMOS, monolithic |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40C to +150C (Tj) | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] |
| Statut RoHS | Compliant | Compliant |
| Family | SPOC+2 | — |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | Classic PROFET 12V |
| Fonction | — | Smart High-Side Power Switch |
| Topologie | — | N-Channel Vertical Power FET with Charge Pump |
| Nombre de sorties | — | 1 |
| Configuration de sortie | — | High-Side |
| Typical On-State Resistance (RDS(on)) | — | 5 mΩ |
| Continuous Load Current | — | 7 A |
| Nominal Operating Voltage | — | 12 V (automotive) |
| Input Type | — | CMOS-compatible, ground-referenced |
| Diagnostic Output | — | Yes (ST pin, ground-referenced feedback) |
| Embedded Protections | — | Overload, Thermal Shutdown, Overvoltage Clamp, ESD |
| Automotive Qualification | — | AEC-Q100 (per Classic PROFET 12V family) |