BTS712204ESAXUMA1 vs BTS70402EPGXUMA1 Vergleich
Detaillierter Direktvergleich von BTS712204ESAXUMA1 von Infineon und BTS70402EPGXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS712204ESAXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,18 | $3,18 |
| Product Type | Smart High-Side Power Switch (SPOC) | — |
| Number of Channels | 4 | 4 |
| Ausgangskonfiguration | High-side (N-channel DMOS) | High-side, N-channel MOSFET |
| On-State Resistance (RDS(on)) | 200 mΩ per channel (typ) | — |
| Output Current per Channel (Source) | 3 A | — |
| Output Current per Channel (Sink) | 5 A | — |
| Current Limit (typ) | 5 A | — |
| Supply Voltage VBB (Operating) | 4.0 V to 28 V | — |
| Load Dump Tolerance | 35 V | — |
| SPI Clock Frequency | 5 MHz | — |
| Quiescent Current (typ) | 80 µA | — |
| Betriebstemperatur | -40 °C to +150 °C (junction) | — |
| Gehäuse | PG-TSDSO-24 EP | PG-TSDSO-14 (exposed thermal pad) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 (168 hours) | — |
| Automotive Qualification | AEC-Q100 Grade 1 | — |
| Diagnostics | 24-bit SPI current readback + fault flags | — |
| Lead-Free / RoHS | Yes (Compliant) | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Funktion | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Betriebstemperaturbereich | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |