BTS712204ESAXUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS712204ESAXUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS712204ESAXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,18 | $3,18 |
| Product Type | Smart High-Side Power Switch (SPOC) | — |
| Number of Channels | 4 | 4 |
| Configuration de sortie | High-side (N-channel DMOS) | High-side, N-channel MOSFET |
| On-State Resistance (RDS(on)) | 200 mΩ per channel (typ) | — |
| Output Current per Channel (Source) | 3 A | — |
| Output Current per Channel (Sink) | 5 A | — |
| Current Limit (typ) | 5 A | — |
| Supply Voltage VBB (Operating) | 4.0 V to 28 V | — |
| Load Dump Tolerance | 35 V | — |
| SPI Clock Frequency | 5 MHz | — |
| Quiescent Current (typ) | 80 µA | — |
| Température de fonctionnement | -40 °C to +150 °C (junction) | — |
| Boîtier | PG-TSDSO-24 EP | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (168 hours) | — |
| Automotive Qualification | AEC-Q100 Grade 1 | — |
| Diagnostics | 24-bit SPI current readback + fault flags | — |
| Lead-Free / RoHS | Yes (Compliant) | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonction | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Plage de température de fonctionnement | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |