BTS712204ESAXUMA1 vs BTS70402EPGXUMA1 Comparison
Detailed side-by-side comparison of BTS712204ESAXUMA1 by Infineon and BTS70402EPGXUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | BTS712204ESAXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Power MOSFET Drivers | Power MOSFET Drivers |
| Lifecycle Status | Active | Active |
| Product Type | Smart High-Side Power Switch (SPOC) | — |
| Number of Channels | 4 | 4 |
| Output Configuration | High-side (N-channel DMOS) | High-side, N-channel MOSFET |
| On-State Resistance (RDS(on)) | 200 mΩ per channel (typ) | — |
| Output Current per Channel (Source) | 3 A | — |
| Output Current per Channel (Sink) | 5 A | — |
| Current Limit (typ) | 5 A | — |
| Supply Voltage VBB (Operating) | 4.0 V to 28 V | — |
| Load Dump Tolerance | 35 V | — |
| SPI Clock Frequency | 5 MHz | — |
| Quiescent Current (typ) | 80 µA | — |
| Operating Temperature | -40 °C to +150 °C (junction) | — |
| Package | PG-TSDSO-24 EP | PG-TSDSO-14 (exposed thermal pad) |
| Mounting Type | Surface Mount | Surface Mount |
| MSL Level | 3 (168 hours) | — |
| Automotive Qualification | AEC-Q100 Grade 1 | — |
| Diagnostics | 24-bit SPI current readback + fault flags | — |
| Lead-Free / RoHS | Yes (Compliant) | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Function | — | Smart High-Side Power Switch |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Protection Features | — | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| Operating Temperature Range | — | -40 °C to +150 °C junction |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |