BTS712204ESEXUMA1 vs BTS51202EKAXUMA1 Vergleich
Detaillierter Direktvergleich von BTS712204ESEXUMA1 von Infineon und BTS51202EKAXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTS712204ESEXUMA1 - 4-Channel 5A Smart High-Side Switch | Infineon
BTS712204ESEXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | BTS712204ESEXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,34 | $1,68 |
| Number of Channels | 4 | 2 |
| Anzahl der Ausgänge | 4 | — |
| Ausgangskonfiguration | High-side | — |
| Nominal Continuous Current per Channel | 5 A | — |
| Typical On-State Resistance per Channel (Rdson) | 30 mOhm | — |
| Betriebsversorgungsspannung | 5 V to 28 V (load-dump tolerant) | — |
| Maximum Load-Dump Voltage | 40 V (per datasheet) | — |
| Quiescent Current (Standby) | [DATA_NEEDED: standby Iq typical] | — |
| SPI / Diagnostic Interface Frequency | 5 MHz | — |
| Schnittstellentyp | Serial (SPI-compatible) + status pins | — |
| Diagnostic Functions | Current limit, over-temperature, open-load, short-to-battery/ground | — |
| Betriebstemperaturbereich | -40 C to +150 C (junction) | — |
| Gehäuse | PG-TSDSO-24 EP (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Package Dimensions | [DATA_NEEDED: PG-TSDSO-24 EP body size] | — |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | MSL 3 (per JEDEC J-STD-020) | — |
| Automotive Qualification | AEC-Q100 Grade 1 capable | — |
| Reverse-Battery Protection | Yes (integrated) | — |
| RoHS / Lead-Free | Yes / Yes (PG-TSDSO EP package) | — |
| Topologie | — | Dual High-Side Switch (2 channels) |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Betriebstemperatur | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |
| RoHS-Status | — | Compliant |