BTS712204ESEXUMA1 vs BTS51202EKAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS712204ESEXUMA1 par Infineon et BTS51202EKAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
BTS712204ESEXUMA1 - 4-Channel 5A Smart High-Side Switch | Infineon
BTS712204ESEXUMA1 ✓ ActifComparaison des spécifications
| Paramètre | BTS712204ESEXUMA1 | BTS51202EKAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,34 | $1,68 |
| Number of Channels | 4 | 2 |
| Nombre de sorties | 4 | — |
| Configuration de sortie | High-side | — |
| Nominal Continuous Current per Channel | 5 A | — |
| Typical On-State Resistance per Channel (Rdson) | 30 mOhm | — |
| Tension d'alimentation de fonctionnement | 5 V to 28 V (load-dump tolerant) | — |
| Maximum Load-Dump Voltage | 40 V (per datasheet) | — |
| Quiescent Current (Standby) | [DATA_NEEDED: standby Iq typical] | — |
| SPI / Diagnostic Interface Frequency | 5 MHz | — |
| Type d'interface | Serial (SPI-compatible) + status pins | — |
| Diagnostic Functions | Current limit, over-temperature, open-load, short-to-battery/ground | — |
| Plage de température de fonctionnement | -40 C to +150 C (junction) | — |
| Boîtier | PG-TSDSO-24 EP (exposed pad) | PG-DSO-14-40-EP (14-pin SOIC with exposed pad) |
| Package Dimensions | [DATA_NEEDED: PG-TSDSO-24 EP body size] | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | MSL 3 (per JEDEC J-STD-020) | — |
| Automotive Qualification | AEC-Q100 Grade 1 capable | — |
| Reverse-Battery Protection | Yes (integrated) | — |
| RoHS / Lead-Free | Yes / Yes (PG-TSDSO EP package) | — |
| Topologie | — | Dual High-Side Switch (2 channels) |
| Technology | — | Smart6 (N-channel vertical MOSFET with charge pump) |
| On-State Resistance (RDS(on)) | — | 120 mΩ (typical per channel) |
| Continuous Output Current | — | 2 A per channel (typical 2.5 A) |
| Operating Voltage (Vbb) | — | 8 V to 18 V |
| Load Type | — | Lamps up to 1×10 W, LEDs, resistive/inductive loads |
| Température de fonctionnement | — | -40 °C to +150 °C |
| Maximum Power Dissipation | — | 1800 mW |
| Integrated Protection | — | Over-current, Short-circuit, Over-temperature, Over-voltage, Under-voltage lockout, Reverse battery |
| Diagnostic Output | — | Yes (status feedback pin) |
| Charge Pump | — | Integrated |
| Automotive Qualified | — | Yes |
| Statut RoHS | — | Compliant |