BTT60302ERAXUMA1 vs BTS70021EPPXUMA1 Vergleich
Detaillierter Direktvergleich von BTT60302ERAXUMA1 von Infineon und BTS70021EPPXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | BTT60302ERAXUMA1 | BTS70021EPPXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,18 | $1,32 |
| Product Type | Dual-channel Smart High-Side Power Switch | — |
| Family | PROFET+ 24V | — |
| Number of Channels | 2 | — |
| On-State Resistance (typ, per channel, 25°C) | 32 mΩ | — |
| Continuous Load Current (per channel) | 4 A | — |
| Operating Supply Voltage (Vbb) | 8 V to 36 V | 6 V to 18 V |
| Load-Dump Tolerance | 42 V | — |
| Switch Type | 1:1 N-Channel high-side | — |
| Process Technology | Smart6 (vertical N-MOSFET + charge pump) | — |
| Diagnostic Output | Current sense (IS pin) | — |
| Protection Features | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection | — |
| Automotive Qualification | AEC-Q100 | — |
| Gehäuse | PG-TDSO-14-31 (14-pin, exposed pad) | PG-TSDSO-14-22 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | -40 °C to +150 °C junction | — |
| Standby Current | [DATA_NEEDED: standby current] | [DATA_NEEDED: typical uA value] |
| RoHS-Status | Compliant | Compliant (Green Product) |
| Product Family | — | PROFET+2 12V |
| Topologie | — | Smart High-Side Switch, N-Channel MOSFET |
| Maximum Continuous Load Current | — | 21 A |
| On-State Resistance (RDS(on)) | — | 2.6 mOhm typical |
| Transient Supply Voltage | — | 28 V (load dump tolerant) |
| Current Sense Output (IS) | — | Analog proportional load current |
| Fault Output (DEN/IN) | — | Yes, latched |
| Reverse Polarity Protection | — | Yes (ReverSave) |
| Overload Protection | — | Yes (current limit) |
| Short-Circuit Protection | — | Yes (latched) |
| Over-Temperature Protection | — | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | — | Yes |
| Load Dump Clamp Voltage | — | 41 V typical |
| Open-Load Detection | — | Yes (on-state and off-state) |
| PWM Capability | — | Yes, up to [DATA_NEEDED: max PWM frequency] |
| Betriebstemperaturbereich | — | -40 C to +150 C junction |
| Qualification | — | AEC-Q100 automotive qualified |