BTT60302ERAXUMA1 vs BTS70021EPPXUMA1 比較
詳細な並列比較: BTT60302ERAXUMA1 メーカー: Infineon および BTS70021EPPXUMA1 メーカー: Infineon。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Infineon
BTS70021EPPXUMA1 - 21A Smart High-Side Switch PG-TSDSO-14 | Infineon
BTS70021EPPXUMA1 ✓ 生産中仕様比較
| パラメータ | BTT60302ERAXUMA1 | BTS70021EPPXUMA1 |
|---|---|---|
| ブランド | Infineon | Infineon |
| カテゴリ | Power MOSFET Drivers | Power MOSFET Drivers |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $2.18 | $1.32 |
| Product Type | Dual-channel Smart High-Side Power Switch | — |
| Family | PROFET+ 24V | — |
| Number of Channels | 2 | — |
| On-State Resistance (typ, per channel, 25°C) | 32 mΩ | — |
| Continuous Load Current (per channel) | 4 A | — |
| Operating Supply Voltage (Vbb) | 8 V to 36 V | 6 V to 18 V |
| Load-Dump Tolerance | 42 V | — |
| Switch Type | 1:1 N-Channel high-side | — |
| Process Technology | Smart6 (vertical N-MOSFET + charge pump) | — |
| Diagnostic Output | Current sense (IS pin) | — |
| Protection Features | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection | — |
| Automotive Qualification | AEC-Q100 | — |
| パッケージ | PG-TDSO-14-31 (14-pin, exposed pad) | PG-TSDSO-14-22 (exposed pad) |
| 実装タイプ | Surface Mount | Surface Mount |
| 動作温度 | -40 °C to +150 °C junction | — |
| Standby Current | [DATA_NEEDED: standby current] | [DATA_NEEDED: typical uA value] |
| RoHS ステータス | Compliant | Compliant (Green Product) |
| Product Family | — | PROFET+2 12V |
| トポロジー | — | Smart High-Side Switch, N-Channel MOSFET |
| Maximum Continuous Load Current | — | 21 A |
| On-State Resistance (RDS(on)) | — | 2.6 mOhm typical |
| Transient Supply Voltage | — | 28 V (load dump tolerant) |
| Current Sense Output (IS) | — | Analog proportional load current |
| Fault Output (DEN/IN) | — | Yes, latched |
| Reverse Polarity Protection | — | Yes (ReverSave) |
| Overload Protection | — | Yes (current limit) |
| Short-Circuit Protection | — | Yes (latched) |
| Over-Temperature Protection | — | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | — | Yes |
| Load Dump Clamp Voltage | — | 41 V typical |
| Open-Load Detection | — | Yes (on-state and off-state) |
| PWM Capability | — | Yes, up to [DATA_NEEDED: max PWM frequency] |
| 動作温度範囲 | — | -40 C to +150 C junction |
| Qualification | — | AEC-Q100 automotive qualified |