BTT60302ERAXUMA1 vs BTS70021EPPXUMA1 비교
다음의 상세 나란히 비교: BTT60302ERAXUMA1 제조: Infineon 및 BTS70021EPPXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTT60302ERAXUMA1 | BTS70021EPPXUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.18 | $1.32 |
| Product Type | Dual-channel Smart High-Side Power Switch | — |
| Family | PROFET+ 24V | — |
| Number of Channels | 2 | — |
| On-State Resistance (typ, per channel, 25°C) | 32 mΩ | — |
| Continuous Load Current (per channel) | 4 A | — |
| Operating Supply Voltage (Vbb) | 8 V to 36 V | 6 V to 18 V |
| Load-Dump Tolerance | 42 V | — |
| Switch Type | 1:1 N-Channel high-side | — |
| Process Technology | Smart6 (vertical N-MOSFET + charge pump) | — |
| Diagnostic Output | Current sense (IS pin) | — |
| Protection Features | Overcurrent, overtemperature, short-to-ground/battery, ESD, open-load detection | — |
| Automotive Qualification | AEC-Q100 | — |
| 패키지 | PG-TDSO-14-31 (14-pin, exposed pad) | PG-TSDSO-14-22 (exposed pad) |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 | -40 °C to +150 °C junction | — |
| Standby Current | [DATA_NEEDED: standby current] | [DATA_NEEDED: typical uA value] |
| RoHS 상태 | Compliant | Compliant (Green Product) |
| Product Family | — | PROFET+2 12V |
| 토폴로지 | — | Smart High-Side Switch, N-Channel MOSFET |
| Maximum Continuous Load Current | — | 21 A |
| On-State Resistance (RDS(on)) | — | 2.6 mOhm typical |
| Transient Supply Voltage | — | 28 V (load dump tolerant) |
| Current Sense Output (IS) | — | Analog proportional load current |
| Fault Output (DEN/IN) | — | Yes, latched |
| Reverse Polarity Protection | — | Yes (ReverSave) |
| Overload Protection | — | Yes (current limit) |
| Short-Circuit Protection | — | Yes (latched) |
| Over-Temperature Protection | — | Yes (thermal shutdown with restart) |
| Over-Voltage Protection (Vbb clamp) | — | Yes |
| Load Dump Clamp Voltage | — | 41 V typical |
| Open-Load Detection | — | Yes (on-state and off-state) |
| PWM Capability | — | Yes, up to [DATA_NEEDED: max PWM frequency] |
| 동작 온도 범위 | — | -40 C to +150 C junction |
| Qualification | — | AEC-Q100 automotive qualified |