CP2102N-A01-GQFN28R vs CP2101R Vergleich
Detaillierter Direktvergleich von CP2102N-A01-GQFN28R von Silicon Labs und CP2101R von Silicon Labs. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Silicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ AktivSpezifikationsvergleich
| Parameter | CP2102N-A01-GQFN28R | CP2101R |
|---|---|---|
| Marke | Silicon Labs | Silicon Labs |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,31 | $0,00 |
| Product Type | USB to UART Bridge Controller | USB-to-UART bridge controller |
| Series | USBXpress | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Interface | USB 2.0 UART | — |
| Number of UART Channels | 1 | — |
| Datenrate | 300 baud to 1 Mbaud | — |
| Supply Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Supply Voltage (VDD) | 3.0 V to 3.6 V | — |
| Internal Regulator Output | 3.3 V (up to ~100 mA) | — |
| Betriebstemperatur | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 28-QFN (5x5 mm) with exposed pad | 28-MLP (5 x 5 mm) |
| Montageart | Surface Mount | — |
| GPIO | Yes (multiple, signal-configurable) | — |
| Reset Pin | RSTb (active-low hardware reset) | — |
| On-chip Oscillator | Yes (no external crystal required) | — |
| MSL-Level | MSL3 (per JEDEC J-STD-020) | — |
| RoHS-Status | Compliant | unknown |
| Host Driver | Silicon Labs CP210x VCP driver | — |
| USB Interface | — | USB 2.0 |
| Versorgungsspannung | — | 3 V to 3.6 V |
| Serial Interface | — | UART |
| Protocol | — | USB |
| Case / Package | — | 28-VFQFN exposed pad |
| Packaging | — | Cut Tape (CT) |
| Interface Function | — | USB 2.0 UART interface |
| Device Category | — | I/O controller interface IC |
| USB Speed | — | [DATA_NEEDED: USB operating speed] |
| Maximum UART Data Rate | — | [DATA_NEEDED: maximum UART baud rate] |
| UART Signal Levels | — | [DATA_NEEDED: UART signal-level specification] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Wärmewiderstand | — | [DATA_NEEDED: exposed-pad thermal resistance] |