CP2102N-A01-GQFN28R vs CP2101R 比較
詳細な並列比較: CP2102N-A01-GQFN28R メーカー: Silicon Labs および CP2101R メーカー: Silicon Labs。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Silicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ 生産中仕様比較
| パラメータ | CP2102N-A01-GQFN28R | CP2101R |
|---|---|---|
| ブランド | Silicon Labs | Silicon Labs |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $2.31 | $0.00 |
| Product Type | USB to UART Bridge Controller | USB-to-UART bridge controller |
| Series | USBXpress | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Interface | USB 2.0 UART | — |
| Number of UART Channels | 1 | — |
| データレート | 300 baud to 1 Mbaud | — |
| Supply Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Supply Voltage (VDD) | 3.0 V to 3.6 V | — |
| Internal Regulator Output | 3.3 V (up to ~100 mA) | — |
| 動作温度 | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| パッケージ | 28-QFN (5x5 mm) with exposed pad | 28-MLP (5 x 5 mm) |
| 実装タイプ | Surface Mount | — |
| GPIO | Yes (multiple, signal-configurable) | — |
| Reset Pin | RSTb (active-low hardware reset) | — |
| On-chip Oscillator | Yes (no external crystal required) | — |
| MSLレベル | MSL3 (per JEDEC J-STD-020) | — |
| RoHS ステータス | Compliant | unknown |
| Host Driver | Silicon Labs CP210x VCP driver | — |
| USB Interface | — | USB 2.0 |
| 電源電圧 | — | 3 V to 3.6 V |
| Serial Interface | — | UART |
| Protocol | — | USB |
| Case / Package | — | 28-VFQFN exposed pad |
| Packaging | — | Cut Tape (CT) |
| Interface Function | — | USB 2.0 UART interface |
| Device Category | — | I/O controller interface IC |
| USB Speed | — | [DATA_NEEDED: USB operating speed] |
| Maximum UART Data Rate | — | [DATA_NEEDED: maximum UART baud rate] |
| UART Signal Levels | — | [DATA_NEEDED: UART signal-level specification] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| 熱抵抗 | — | [DATA_NEEDED: exposed-pad thermal resistance] |