CP2102N-A01-GQFN28R vs CP2101R Comparación
Comparación detallada lado a lado de CP2102N-A01-GQFN28R por Silicon Labs y CP2101R por Silicon Labs. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Silicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ ActivoComparación de especificaciones
| Parámetro | CP2102N-A01-GQFN28R | CP2101R |
|---|---|---|
| Marca | Silicon Labs | Silicon Labs |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,31 | $0,00 |
| Product Type | USB to UART Bridge Controller | USB-to-UART bridge controller |
| Series | USBXpress | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Interface | USB 2.0 UART | — |
| Number of UART Channels | 1 | — |
| Velocidad de datos | 300 baud to 1 Mbaud | — |
| Supply Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Supply Voltage (VDD) | 3.0 V to 3.6 V | — |
| Internal Regulator Output | 3.3 V (up to ~100 mA) | — |
| Temperatura de funcionamiento | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | 28-QFN (5x5 mm) with exposed pad | 28-MLP (5 x 5 mm) |
| Tipo de montaje | Surface Mount | — |
| GPIO | Yes (multiple, signal-configurable) | — |
| Reset Pin | RSTb (active-low hardware reset) | — |
| On-chip Oscillator | Yes (no external crystal required) | — |
| Nivel MSL | MSL3 (per JEDEC J-STD-020) | — |
| Estado RoHS | Compliant | unknown |
| Host Driver | Silicon Labs CP210x VCP driver | — |
| USB Interface | — | USB 2.0 |
| Tensión de alimentación | — | 3 V to 3.6 V |
| Serial Interface | — | UART |
| Protocol | — | USB |
| Case / Package | — | 28-VFQFN exposed pad |
| Packaging | — | Cut Tape (CT) |
| Interface Function | — | USB 2.0 UART interface |
| Device Category | — | I/O controller interface IC |
| USB Speed | — | [DATA_NEEDED: USB operating speed] |
| Maximum UART Data Rate | — | [DATA_NEEDED: maximum UART baud rate] |
| UART Signal Levels | — | [DATA_NEEDED: UART signal-level specification] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |
| Resistencia térmica | — | [DATA_NEEDED: exposed-pad thermal resistance] |