EPC1441TC32 vs EPC144TC32N Vergleich
Detaillierter Direktvergleich von EPC1441TC32 von Altera und EPC144TC32N von Altera. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Altera
EPC144TC32N - Enhanced Configuration Device, 32-pin TQFP | Intel (Altera)
EPC144TC32N ObsoleteSpezifikationsvergleich
| Parameter | EPC1441TC32 | EPC144TC32N |
|---|---|---|
| Marke | Altera | Altera |
| Kategorie | Memory ICs | FPGA & CPLD |
| Lebenszyklusstatus | Obsolete | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $9,75 | $3,85 |
| Speichertyp | OTP Configuration PROM (flash-based) | — |
| Speichergröße | 440 Kbit (55000 byte) | — |
| Programmability | One-Time Programmable (OTP) | — |
| Versorgungsspannung | 3.3 V / 5.0 V | — |
| Internal Oscillator | 16.7 MHz | — |
| In-System Programming | IEEE 1149.1 JTAG, 3.3 V / 5.0 V | — |
| Supported FPGA Families | ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II, Stratix II GX | — |
| Configuration Modes | Passive Serial, Fast Passive Parallel, Passive Parallel Asynchronous | — |
| Daisy Chain Support | Yes | — |
| Gehäuse | 32-TQFP (7 mm x 7 mm) | TQFP-32 |
| Betriebstemperatur | Commercial (0C to +70C) | -40C to +85C (industrial) |
| Montageart | Surface Mount | Surface Mount |
| Terminal Form | Gull Wing | — |
| Terminal Pitch | 0.8 mm | — |
| MSL-Level | 3 (168 hours) | [DATA_NEEDED: MSL level] |
| RoHS-Status | [DATA_NEEDED: RoHS status - datasheet not yet verified] | — |
| Device Type | — | Enhanced Configuration (EPC) Device, serial EEPROM |
| Configuration Memory Size | — | 440800 bits (approximately 54 KB) |
| Compatible FPGA Families | — | FLEX 8000, FLEX 10K, ACEX 1K, APEX 20K, Mercury |
| Configuration Interface | — | Altera serial (DATA0, DCLK, nCONFIG, nSTATUS, CONF_DONE) |
| Programming Interface | — | IEEE Std 1149.1 JTAG (TMS, TCK, TDI, TDO) |
| In-System Programmability | — | Yes (ISP via JTAG) |
| Supply Voltage VCC | — | 3.0 V to 3.6 V (typical 3.3 V) |
| Supply Voltage VPP | — | Generated internally (no external VPP required) |
| Lead-Free / RoHS | — | [DATA_NEEDED: lead-free status] |
| JTAG Chain Compatibility | — | Yes (shares TDI/TDO with target FPGA) |
| Programming Cycles | — | [DATA_NEEDED: endurance] |