EPC16QC100II vs EPC16QC-100T Vergleich
Detaillierter Direktvergleich von EPC16QC100II von Altera und EPC16QC-100T von Altera. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | EPC16QC100II | EPC16QC-100T |
|---|---|---|
| Marke | Altera | Altera |
| Kategorie | Memory ICs | Memory ICs |
| Lebenszyklusstatus | NRND | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,75 | $14,50 |
| Speichertyp | FPGA Configuration PROM (Flash-based) | Flash Configuration PROM (in-system programmable) |
| Memory Density | 16 Mbit | 16 Mbit (2 Mbyte) |
| Supported FPGA Families | APEX II, APEX 20K, Mercury, ACEX 1K, FLEX 10K, FLEX 8000, Cyclone | Stratix, APEX II, APEX 20K, Mercury, ACEX 1K, FLEX 10K |
| Configuration Mode | FPP / PSA (Fast Passive Parallel / Passive Serial Asynchronous) | — |
| Programmability | In-System Programmable via IEEE 1149.1 (JTAG) | — |
| Cascade Support | Yes (multi-PROM cascading supported) | — |
| Core Supply Voltage | 3.3 V | — |
| I/O Tolerance | 5 V tolerant configuration pins | — |
| Gehäuse | 100-pin PQFP (Plastic Quad Flat Pack) | 100-pin PQFP (20 x 14 mm), 0.65 mm pitch |
| Package Dimensions | 20 mm x 14 mm, 0.5 mm pitch | — |
| Lead Finish | Matte Tin (lead-free) | — |
| Betriebstemperatur | -40C to +85C (Industrial) | [DATA_NEEDED: Operating temperature range] |
| MSL-Level | 3 (per JEDEC J-STD-020) | [DATA_NEEDED: Moisture sensitivity level] |
| RoHS-Status | Compliant | unknown |
| Configuration Pins | DCLK, DATA[0..n], nCONFIG, nSTATUS, CONF_DONE, OE | — |
| Compression Support | Yes (reduces on-PROM footprint vs uncompressed bitstream) | — |
| Configuration Data Width | — | 8-bit or 16-bit (cascaded dual-device mode) |
| Configuration Modes | — | Serial (single device), Parallel (two cascaded devices) |
| Data Compression Support | — | Yes (35% to 55% bitstream reduction typical) |
| JTAG / Boundary Scan | — | IEEE 1149.1 compliant, in-system programmable |
| Versorgungsspannung | — | 3.3 V |
| Cascade Interface | — | nCE / nOE handshake for multi-device chains |
| Programming Interface | — | JTAG (IEEE 1149.1) and serial |
| Endurance | — | [DATA_NEEDED: Program/erase cycle rating] |
| Data Retention | — | [DATA_NEEDED: Data retention specification] |
| Lead-Free | — | unknown |
| Montageart | — | Surface Mount |