EPC16QC100N vs EPC16QI100TBAC Vergleich

Detaillierter Direktvergleich von EPC16QC100N von Altera und EPC16QI100TBAC von Altera. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Altera
EPC16QI100TBAC EPC16QI100TBAC - Altera Enhanced Configuration PROM 16Mb | FPGA

EPC16QI100TBAC - Altera Enhanced Configuration PROM 16Mb | FPGA

EPC16QI100TBAC ⚠ Letzte Bestellmöglichkeit

Spezifikationsvergleich

Parameter EPC16QC100N EPC16QI100TBAC
Marke Altera Altera
Kategorie Memory ICs Memory ICs
Lebenszyklusstatus Obsolete Letzte Kaufgelegenheit
Lagerstatus In Stock In Stock
Stückpreis (USD) $24,10 $15,95
Speichergröße 16 Mbit (16,777,216 bits) —
Programmable Type In System Programmable —
Configuration Clock Frequency 33 MHz max —
On-Chip Decompression Yes (supports compressed bitstreams) —
Supply Voltage (VCC) 3.0 V to 3.6 V —
Access Time 90 ns typical —
Flash Read Bandwidth 160 Mbps (16-bit DQ at 10 MHz) —
Configuration Interface FPP / PS / AS via dedicated FPGA pins —
JTAG (IEEE 1149.1) ISP Supported —
Betriebstemperatur 0 C to 70 C -40C to +85C (industrial)
Gehäuse 100-pin PQFP (20 x 14 mm) 100-pin PQFP (20 x 14 mm)
Montageart Surface Mount Surface Mount (PQFP)
Lead Free Yes (per datasheet) —
Packaging Tray —
Supported FPGA Families ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II, Stratix II GX Altera Stratix, Cyclone, Arria series
Memory Density — 16 Mbit (2 Mbyte)
Speichertyp — Flash (Enhanced Configuration Device)
Versorgungsspannung — 3.3 V
Configuration Modes — Passive Parallel Synchronous (PPS), Passive Parallel Asynchronous (PPA), Passive Serial (PS)
Maximum Configuration Clock — 40 MHz
Number of Configuration Pages — Up to 8 (selectable via PGM[2..0])
In-System Programmable — Yes (via JTAG / IEEE 1149.1)
JTAG Support — Yes (IEEE 1149.1 boundary-scan and programming)
Data Compression — Supported (15-30% density gain depending on target FPGA)
MSL-Level — 3 (168 hours)
Lead-Free / RoHS — Lead-free (per JEDEC J-STD-020); RoHS compliance: [DATA_NEEDED]
Dynamic Reconfiguration — Yes (page mode via PGM[2..0] pins)
Configuration Controller — Integrated
Programming Interface — JTAG / 4-wire passive serial

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern