EPC16QI100TBAC vs EPC18QI100 Vergleich
Detaillierter Direktvergleich von EPC16QI100TBAC von Altera und EPC18QI100 von Altera. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Altera
EPC16QI100TBAC - Altera Enhanced Configuration PROM 16Mb | FPGA
EPC16QI100TBAC ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | EPC16QI100TBAC | EPC18QI100 |
|---|---|---|
| Marke | Altera | Altera |
| Kategorie | Memory ICs | Memory ICs |
| Lebenszyklusstatus | Letzte Kaufgelegenheit | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $15,95 | $10,40 |
| Memory Density | 16 Mbit (2 Mbyte) | 18 Mbit (18,874,368 bits) |
| Speichertyp | Flash (Enhanced Configuration Device) | — |
| Versorgungsspannung | 3.3 V | — |
| Configuration Modes | Passive Parallel Synchronous (PPS), Passive Parallel Asynchronous (PPA), Passive Serial (PS) | — |
| Maximum Configuration Clock | 40 MHz | — |
| Number of Configuration Pages | Up to 8 (selectable via PGM[2..0]) | — |
| Gehäuse | 100-pin PQFP (20 x 14 mm) | 100-pin PQFP (Plastic Quad Flat Pack) |
| In-System Programmable | Yes (via JTAG / IEEE 1149.1) | — |
| JTAG Support | Yes (IEEE 1149.1 boundary-scan and programming) | — |
| Supported FPGA Families | Altera Stratix, Cyclone, Arria series | — |
| Data Compression | Supported (15-30% density gain depending on target FPGA) | — |
| Betriebstemperatur | -40C to +85C (industrial) | — |
| Montageart | Surface Mount (PQFP) | Surface Mount |
| MSL-Level | 3 (168 hours) | [DATA_NEEDED: MSL level] |
| Lead-Free / RoHS | Lead-free (per JEDEC J-STD-020); RoHS compliance: [DATA_NEEDED] | — |
| Dynamic Reconfiguration | Yes (page mode via PGM[2..0] pins) | — |
| Configuration Controller | Integrated | — |
| Programming Interface | JTAG / 4-wire passive serial | JTAG (IEEE 1149.1) in-system programmable |
| Manufacturer | — | Altera (now Intel Programmable Solutions Group) |
| Device Type | — | FPGA Configuration PROM (nonvolatile) |
| Configuration Interface | — | Altera serial (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) |
| Core Supply Voltage (VCCINT) | — | 3.3 V |
| I/O Supply Voltage (VCCIO) | — | 3.3 V or 5 V tolerant |
| Cascading Support | — | Yes (via nCASC pin, multi-device chains supported) |
| Package Dimensions | — | 14 mm x 20 mm x 1.4 mm (body) / 3.4 mm (overall incl. leads) |
| Betriebstemperaturbereich | — | -40 C to +85 C (industrial) |
| Lead Finish | — | Matte tin (lead-free, per Altera Pb-free roadmap) |
| RoHS-Status | — | Compliant (Pb-free part marking) |
| Configuration Time | — | [DATA_NEEDED: configuration time at typical DCLK] |
| End-of-Life Status | — | Obsolete; replaced by Altera/Intel EPCQ family |