EPC1LI20 vs EPC1PC8CC Vergleich
Detaillierter Direktvergleich von EPC1LI20 von Altera und EPC1PC8CC von Intel. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | EPC1LI20 | EPC1PC8CC |
|---|---|---|
| Marke | Altera | Intel |
| Kategorie | Memory ICs | Memory ICs |
| Lebenszyklusstatus | Obsolete | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $8,50 | $9,95 |
| Speichertyp | OTP Configuration PROM (EPROM-based) | EPROM (OTP, UV-erasable window optional) |
| Speichergröße | 1 Mb (1,048,576 bits) | 1 Mbit (1,048,576 bits) |
| Configuration Interface | Altera Passive Serial / Altera Active Serial / JTAG (IEEE 1149.1) | Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) |
| Maximum Configuration Clock | 8 MHz | — |
| Supply Voltage (VCC) | 5.0 V (4.75 V to 5.25 V) | — |
| Programming Voltage (VPP) | 12.75 V (typical, factory-programmed via JTAG) | — |
| Gehäuse | 20-pin PLCC (J-lead, 9x9 mm) | PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) |
| Pin-Anzahl | 20 | 8 |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | — |
| Cascading Support | Yes (nCASC pin for multi-device daisy chain) | — |
| Endurance | OTP (one-time programmable, 1000 erase-equivalent UV cycles for pre-program erase) | — |
| JTAG Programming | Yes (in-system via IEEE 1149.1) | — |
| Compatible FPGA Families | FLEX 8000, FLEX 10K, ACEX 1K, APEX 20K, Mercury | ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria |
| Montageart | Surface Mount (PLCC socket compatible) | Through-Hole (DIP socketable) |
| MSL-Level | 1 (per Partstack datasheet record) | 1 (unlimited floor life) |
| RoHS-Status | [DATA_NEEDED: RoHS status - original Altera part may be non-RoHS SnPb finish] | — |
| Funktion | — | FPGA Configuration PROM |
| Supply Voltage VCC | — | 3.0 V to 3.6 V (typical 3.3 V) |
| Maximum DCLK Frequency | — | 17.6 MHz (17.6 Mb/s effective bitstream rate) |
| Betriebstemperaturbereich | — | [DATA_NEEDED: full industrial range from datasheet] |
| Cascade Support | — | Not supported in DIP-8 package (nCASC pin not exposed) |
| Programming Interface | — | JTAG via Altera Quartus / Quartus Prime ByteBlaster |
| Error Detection | — | Built-in CRC during configuration transfer |
| Lead-Free / RoHS | — | Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant |