EPC1LI20 vs EPC1PC8CC Karşılaştırma
Ayrıntılı yan yana karşılaştırma EPC1LI20 tarafından Altera ve EPC1PC8CC tarafından IntelAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | EPC1LI20 | EPC1PC8CC |
|---|---|---|
| Marka | Altera | Intel |
| Kategori | Memory ICs | Memory ICs |
| Yaşam Döngüsü Durumu | Obsolete | Obsolete |
| Bellek Türü | OTP Configuration PROM (EPROM-based) | EPROM (OTP, UV-erasable window optional) |
| Bellek Boyutu | 1 Mb (1,048,576 bits) | 1 Mbit (1,048,576 bits) |
| Configuration Interface | Altera Passive Serial / Altera Active Serial / JTAG (IEEE 1149.1) | Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) |
| Maximum Configuration Clock | 8 MHz | — |
| Supply Voltage (VCC) | 5.0 V (4.75 V to 5.25 V) | — |
| Programming Voltage (VPP) | 12.75 V (typical, factory-programmed via JTAG) | — |
| Paket | 20-pin PLCC (J-lead, 9x9 mm) | PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) |
| Pin Sayısı | 20 | 8 |
| İşletim Sıcaklığı | [DATA_NEEDED: operating temperature range] | — |
| Cascading Support | Yes (nCASC pin for multi-device daisy chain) | — |
| Endurance | OTP (one-time programmable, 1000 erase-equivalent UV cycles for pre-program erase) | — |
| JTAG Programming | Yes (in-system via IEEE 1149.1) | — |
| Compatible FPGA Families | FLEX 8000, FLEX 10K, ACEX 1K, APEX 20K, Mercury | ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria |
| Montaj Türü | Surface Mount (PLCC socket compatible) | Through-Hole (DIP socketable) |
| MSL Seviyesi | 1 (per Partstack datasheet record) | 1 (unlimited floor life) |
| RoHS Durumu | [DATA_NEEDED: RoHS status - original Altera part may be non-RoHS SnPb finish] | — |
| Fonksiyon | — | FPGA Configuration PROM |
| Supply Voltage VCC | — | 3.0 V to 3.6 V (typical 3.3 V) |
| Maximum DCLK Frequency | — | 17.6 MHz (17.6 Mb/s effective bitstream rate) |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: full industrial range from datasheet] |
| Cascade Support | — | Not supported in DIP-8 package (nCASC pin not exposed) |
| Programming Interface | — | JTAG via Altera Quartus / Quartus Prime ByteBlaster |
| Error Detection | — | Built-in CRC during configuration transfer |
| Lead-Free / RoHS | — | Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant |