EPC1PC8CC vs EPC1PC8 Vergleich
Detaillierter Direktvergleich von EPC1PC8CC von Intel und EPC1PC8 von Altera. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | EPC1PC8CC | EPC1PC8 |
|---|---|---|
| Marke | Intel | Altera |
| Kategorie | Memory ICs | Memory ICs |
| Lebenszyklusstatus | Obsolete | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $9,95 | $4,10 |
| Speichergröße | 1 Mbit (1,048,576 bits) | 1 Mbit (1,048,576 bits) |
| Speichertyp | EPROM (OTP, UV-erasable window optional) | OTP Configuration PROM (Non-volatile) |
| Funktion | FPGA Configuration PROM | — |
| Configuration Interface | Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) | Altera proprietary serial (DATA, DCLK, OE, nCS) |
| Supply Voltage VCC | 3.0 V to 3.6 V (typical 3.3 V) | — |
| Maximum DCLK Frequency | 17.6 MHz (17.6 Mb/s effective bitstream rate) | — |
| Betriebstemperaturbereich | [DATA_NEEDED: full industrial range from datasheet] | — |
| Gehäuse | PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) | 8-pin PDIP (8-PDIP, 300 mil) |
| Montageart | Through-Hole (DIP socketable) | Through-Hole (THT) |
| Cascade Support | Not supported in DIP-8 package (nCASC pin not exposed) | — |
| Programming Interface | JTAG via Altera Quartus / Quartus Prime ByteBlaster | — |
| Error Detection | Built-in CRC during configuration transfer | — |
| MSL-Level | 1 (unlimited floor life) | [DATA_NEEDED: moisture sensitivity level] |
| Lead-Free / RoHS | Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant | — |
| Compatible FPGA Families | ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria | — |
| Pin-Anzahl | 8 | — |
| Supply Voltage (VCC) | — | 5.0 V (typical) |
| Programmability | — | One-Time Programmable (OTP) |
| Target FPGAs | — | ACEX 1K, APEX 20K/20KE/20KC, FLEX 10K/10KE/10KA, FLEX 6000/A |
| Pin Pitch | — | 2.54 mm (0.100 in) |
| Betriebstemperatur | — | 0 C to +70 C (commercial) [DATA_NEEDED: full min/max range] |
| Programming Hardware | — | Altera MasterBlaster / ByteBlaster (legacy programmer) |
| Configuration Mode | — | Serial (1-bit data, 1-bit clock) |
| RoHS-Status | — | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free | — | [DATA_NEEDED: lead-free / SnPb plating] |