EPC1PC8CC vs EPC1PC8 Comparación
Comparación detallada lado a lado de EPC1PC8CC por Intel y EPC1PC8 por Altera. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | EPC1PC8CC | EPC1PC8 |
|---|---|---|
| Marca | Intel | Altera |
| Categoría | Memory ICs | Memory ICs |
| Estado del ciclo de vida | Obsolete | Obsolete |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $9,95 | $4,10 |
| Tamaño de memoria | 1 Mbit (1,048,576 bits) | 1 Mbit (1,048,576 bits) |
| Tipo de memoria | EPROM (OTP, UV-erasable window optional) | OTP Configuration PROM (Non-volatile) |
| Función | FPGA Configuration PROM | — |
| Configuration Interface | Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) | Altera proprietary serial (DATA, DCLK, OE, nCS) |
| Supply Voltage VCC | 3.0 V to 3.6 V (typical 3.3 V) | — |
| Maximum DCLK Frequency | 17.6 MHz (17.6 Mb/s effective bitstream rate) | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: full industrial range from datasheet] | — |
| Encapsulado | PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) | 8-pin PDIP (8-PDIP, 300 mil) |
| Tipo de montaje | Through-Hole (DIP socketable) | Through-Hole (THT) |
| Cascade Support | Not supported in DIP-8 package (nCASC pin not exposed) | — |
| Programming Interface | JTAG via Altera Quartus / Quartus Prime ByteBlaster | — |
| Error Detection | Built-in CRC during configuration transfer | — |
| Nivel MSL | 1 (unlimited floor life) | [DATA_NEEDED: moisture sensitivity level] |
| Lead-Free / RoHS | Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant | — |
| Compatible FPGA Families | ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria | — |
| Recuento de pines | 8 | — |
| Supply Voltage (VCC) | — | 5.0 V (typical) |
| Programmability | — | One-Time Programmable (OTP) |
| Target FPGAs | — | ACEX 1K, APEX 20K/20KE/20KC, FLEX 10K/10KE/10KA, FLEX 6000/A |
| Pin Pitch | — | 2.54 mm (0.100 in) |
| Temperatura de funcionamiento | — | 0 C to +70 C (commercial) [DATA_NEEDED: full min/max range] |
| Programming Hardware | — | Altera MasterBlaster / ByteBlaster (legacy programmer) |
| Configuration Mode | — | Serial (1-bit data, 1-bit clock) |
| Estado RoHS | — | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free | — | [DATA_NEEDED: lead-free / SnPb plating] |