EPC1PC8CC vs EPC1PC8 Comparaison
Comparaison détaillée côte à côte de EPC1PC8CC par Intel et EPC1PC8 par Altera. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | EPC1PC8CC | EPC1PC8 |
|---|---|---|
| Marque | Intel | Altera |
| Catégorie | Memory ICs | Memory ICs |
| Statut du cycle de vie | Obsolete | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $9,95 | $4,10 |
| Taille de mémoire | 1 Mbit (1,048,576 bits) | 1 Mbit (1,048,576 bits) |
| Type de mémoire | EPROM (OTP, UV-erasable window optional) | OTP Configuration PROM (Non-volatile) |
| Fonction | FPGA Configuration PROM | — |
| Configuration Interface | Altera Passive Serial (PS), 4-wire (nSTATUS, nCONFIG, DCLK, DATA0) | Altera proprietary serial (DATA, DCLK, OE, nCS) |
| Supply Voltage VCC | 3.0 V to 3.6 V (typical 3.3 V) | — |
| Maximum DCLK Frequency | 17.6 MHz (17.6 Mb/s effective bitstream rate) | — |
| Plage de température de fonctionnement | [DATA_NEEDED: full industrial range from datasheet] | — |
| Boîtier | PDIP-8 (Plastic DIP, 8-pin, 0.1" pitch) | 8-pin PDIP (8-PDIP, 300 mil) |
| Type de montage | Through-Hole (DIP socketable) | Through-Hole (THT) |
| Cascade Support | Not supported in DIP-8 package (nCASC pin not exposed) | — |
| Programming Interface | JTAG via Altera Quartus / Quartus Prime ByteBlaster | — |
| Error Detection | Built-in CRC during configuration transfer | — |
| Niveau MSL | 1 (unlimited floor life) | [DATA_NEEDED: moisture sensitivity level] |
| Lead-Free / RoHS | Not lead-free (legacy Altera/Intel PC8 suffix is Sn-Pb finish); RoHS non-compliant variant | — |
| Compatible FPGA Families | ACEX 1K, APEX 20K, APEX II, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, Stratix II, Arria | — |
| Nombre de broches | 8 | — |
| Supply Voltage (VCC) | — | 5.0 V (typical) |
| Programmability | — | One-Time Programmable (OTP) |
| Target FPGAs | — | ACEX 1K, APEX 20K/20KE/20KC, FLEX 10K/10KE/10KA, FLEX 6000/A |
| Pin Pitch | — | 2.54 mm (0.100 in) |
| Température de fonctionnement | — | 0 C to +70 C (commercial) [DATA_NEEDED: full min/max range] |
| Programming Hardware | — | Altera MasterBlaster / ByteBlaster (legacy programmer) |
| Configuration Mode | — | Serial (1-bit data, 1-bit clock) |
| Statut RoHS | — | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free | — | [DATA_NEEDED: lead-free / SnPb plating] |