EPC2TC32UCF48 vs EPC2TC32U Vergleich
Detaillierter Direktvergleich von EPC2TC32UCF48 von Intel und EPC2TC32U von Altera. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | EPC2TC32UCF48 | EPC2TC32U |
|---|---|---|
| Marke | Intel | Altera |
| Kategorie | Memory ICs | FPGA & CPLD |
| Lebenszyklusstatus | NRND | NRND |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,85 | $5,85 |
| Speichertyp | Non-volatile configuration PROM (CMOS Flash-based) | — |
| Memory Density | 1.6 Mbit (1.6 Mb / 32 Mbit raw) | — |
| Memory Configuration | Serial configuration bitstream storage | — |
| Supply Voltage (VCC) | 3.0 V to 3.6 V (3.3 V typical) | — |
| Supply Voltage (VCCIO) | 1.8 V / 2.5 V / 3.3 V (bank-level) | — |
| Output Drive Current (VCCIO) | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] | — |
| Programming Interface | IEEE Std. 1149.1 JTAG (in-system programmable) | — |
| Configuration Interface | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) | Altera Passive Serial (DCLK / DATA0 / nCONFIG / nSTATUS / CONF_DONE) |
| Supported Configuration Modes | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) | — |
| Daisy Chain Support | Yes (multi-device cascade for >16 Mbit FPGAs) | — |
| Maximum Cascaded Capacity | Up to 16 Mbit total across chain | — |
| Betriebstemperatur | 0C to +70C (commercial) | -40 C to +85 C |
| Gehäuse | 48-pin TQFP (7x7 mm) | 32-pin QFP (CAF48, lead-free) |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL level] |
| RoHS-Status | [DATA_NEEDED: confirm RoHS compliance] | Compliant (lead-free / RoHS per distributor data) |
| Lead Free | [DATA_NEEDED: confirm lead-free] | — |
| Funktion | — | Serial Configuration Device for SRAM-based LUT FPGAs |
| Speichergröße | — | 1.6 Mbit |
| JTAG Support | — | Yes (IEEE 1149.1 boundary-scan, ISP) |
| Versorgungsspannung | — | 3.0 V to 3.6 V or 4.75 V to 5.25 V |
| Lead-Free Finish | — | Yes (U suffix) |
| Supported FPGA Families | — | Altera Stratix, Cyclone, APEX, ACEX, Mercury, Excalibur |
| Configuration Mode | — | Passive Serial (PS), JTAG |
| Configuration Time | — | [DATA_NEEDED: typical configuration time] |
| Programming Cycles | — | [DATA_NEEDED: minimum program/erase cycles] |
| Data Retention | — | [DATA_NEEDED: minimum data retention years] |