IFX007TAUMA1 vs BTS3011TEATMA1 Vergleich
Detaillierter Direktvergleich von IFX007TAUMA1 von Infineon und BTS3011TEATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | IFX007TAUMA1 | BTS3011TEATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Motor Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,62 | $0,51 |
| Product Type | Half-Bridge Motor Driver (H-Bridge half) | Smart Low-Side Power Switch |
| Topologie | High-side P-MOSFET + Low-side N-MOSFET with integrated driver | — |
| Supply Voltage Range | 5.5 V to 40 V | — |
| Continuous Load Current | 40 A (typical application) | 10 A |
| MOSFET RDS(on) (typical) | 12.8 mΩ (per switch) | — |
| Logic Input HIGH (IN high) | 1.6 V to 2.0 V | — |
| Logic Input LOW (IN low) | 1.1 V to 1.3 V | — |
| PWM Frequency (max) | 25 kHz | — |
| Betriebstemperaturbereich | -40 °C to +150 °C (junction) | — |
| Protection Features | Over-temperature, over-current latch, under-voltage lockout, short-circuit | — |
| Status Output | Yes (open-drain fault flag) | — |
| Current Sensing | Integrated via low-side RDS(on) sensing (no shunt required) | — |
| Gehäuse | PG-TO263-7-1 (D2PAK-7) with exposed thermal tab | PG-TO252-5 (DPAK-5) |
| Pin-Anzahl | 7 + Tab | — |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 (per JEDEC J-STD-020) | — |
| RoHS-Status | Compliant | Compliant |
| Automotive Qualification | AEC-Q100 qualified (per product family) | — |
| Number of Channels | — | 1 |
| On-Resistance R_DS(on) (typ.) | — | 11 mΩ |
| Operating Voltage Range | — | 3 V to 28 V |
| Switch Technology | — | N-channel vertical power MOSFET |
| Input Type | — | Logic-level CMOS compatible |
| Anzahl der Pins | — | 5 (4 + Tab) |
| Betriebs-Sperrschichttemperatur | — | -40 °C to +150 °C |
| ESD Protection (HBM) | — | ±8 kV (output pin) |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Integrated Protections | — | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection |
| Diagnostic Output | — | Open-drain status feedback pin |