IFX007TAUMA1 vs BTS3011TEATMA1 Comparaison
Comparaison détaillée côte à côte de IFX007TAUMA1 par Infineon et BTS3011TEATMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | IFX007TAUMA1 | BTS3011TEATMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Motor Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,62 | $0,51 |
| Product Type | Half-Bridge Motor Driver (H-Bridge half) | Smart Low-Side Power Switch |
| Topologie | High-side P-MOSFET + Low-side N-MOSFET with integrated driver | — |
| Supply Voltage Range | 5.5 V to 40 V | — |
| Continuous Load Current | 40 A (typical application) | 10 A |
| MOSFET RDS(on) (typical) | 12.8 mΩ (per switch) | — |
| Logic Input HIGH (IN high) | 1.6 V to 2.0 V | — |
| Logic Input LOW (IN low) | 1.1 V to 1.3 V | — |
| PWM Frequency (max) | 25 kHz | — |
| Plage de température de fonctionnement | -40 °C to +150 °C (junction) | — |
| Protection Features | Over-temperature, over-current latch, under-voltage lockout, short-circuit | — |
| Status Output | Yes (open-drain fault flag) | — |
| Current Sensing | Integrated via low-side RDS(on) sensing (no shunt required) | — |
| Boîtier | PG-TO263-7-1 (D2PAK-7) with exposed thermal tab | PG-TO252-5 (DPAK-5) |
| Nombre de broches | 7 + Tab | — |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (per JEDEC J-STD-020) | — |
| Statut RoHS | Compliant | Compliant |
| Automotive Qualification | AEC-Q100 qualified (per product family) | — |
| Number of Channels | — | 1 |
| On-Resistance R_DS(on) (typ.) | — | 11 mΩ |
| Operating Voltage Range | — | 3 V to 28 V |
| Switch Technology | — | N-channel vertical power MOSFET |
| Input Type | — | Logic-level CMOS compatible |
| Nombre de broches | — | 5 (4 + Tab) |
| Température de jonction en fonctionnement | — | -40 °C to +150 °C |
| ESD Protection (HBM) | — | ±8 kV (output pin) |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Integrated Protections | — | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection |
| Diagnostic Output | — | Open-drain status feedback pin |