IFX007TAUMA1 vs BTS3011TEATMA1 Comparación
Comparación detallada lado a lado de IFX007TAUMA1 por Infineon y BTS3011TEATMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | IFX007TAUMA1 | BTS3011TEATMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Motor Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $2,62 | $0,51 |
| Product Type | Half-Bridge Motor Driver (H-Bridge half) | Smart Low-Side Power Switch |
| Topología | High-side P-MOSFET + Low-side N-MOSFET with integrated driver | — |
| Supply Voltage Range | 5.5 V to 40 V | — |
| Continuous Load Current | 40 A (typical application) | 10 A |
| MOSFET RDS(on) (typical) | 12.8 mΩ (per switch) | — |
| Logic Input HIGH (IN high) | 1.6 V to 2.0 V | — |
| Logic Input LOW (IN low) | 1.1 V to 1.3 V | — |
| PWM Frequency (max) | 25 kHz | — |
| Rango de temperatura de funcionamiento | -40 °C to +150 °C (junction) | — |
| Protection Features | Over-temperature, over-current latch, under-voltage lockout, short-circuit | — |
| Status Output | Yes (open-drain fault flag) | — |
| Current Sensing | Integrated via low-side RDS(on) sensing (no shunt required) | — |
| Encapsulado | PG-TO263-7-1 (D2PAK-7) with exposed thermal tab | PG-TO252-5 (DPAK-5) |
| Recuento de pines | 7 + Tab | — |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 3 (per JEDEC J-STD-020) | — |
| Estado RoHS | Compliant | Compliant |
| Automotive Qualification | AEC-Q100 qualified (per product family) | — |
| Number of Channels | — | 1 |
| On-Resistance R_DS(on) (typ.) | — | 11 mΩ |
| Operating Voltage Range | — | 3 V to 28 V |
| Switch Technology | — | N-channel vertical power MOSFET |
| Input Type | — | Logic-level CMOS compatible |
| Número de pines | — | 5 (4 + Tab) |
| Temperatura de unión de funcionamiento | — | -40 °C to +150 °C |
| ESD Protection (HBM) | — | ±8 kV (output pin) |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Integrated Protections | — | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection |
| Diagnostic Output | — | Open-drain status feedback pin |